|
Блок питания 40W
Блок питания 40W
Блок питания CO2-лазера EStandard - линейка стандартных универстальных источника питания для большинства станков лазерной резки и гравировки. Источники отвечают всем требованиям в использовании СО2 лазерных трубок, выпускаемых массово различными производителями.
основные характеристики: - хорошая совместимость, - простое управление по уровню TTL: имеет индикацию сигнала TTL, индикацию воды и выходного сигнала лазера. - блок имеет защиту от разрыва цепи. Имеет кнопку для проверки выходного лазера вручную. - быстрая скорость отклика, высокая эффективность.
Connection of the Power Supply:
Pin Definition: P1:
L- - Connect Negative Electrode of Laser Tube FG - Connect with G Internal,and Connect the Power Supply Shell. AC, AC - AC 110V/220V Input. P2:
P+ - Water-Protction Switch G - Ground: The foot must connected with laser machine's enclosure and ground properly. K- - Ground: The foot must connected with laser machine's enclosure and ground properly. K+ - Switch Laser Control: High Level(≥3V)- Laser Off, Low Level(≤0.3V)-Laser On. G - Ground: The foot must connected with laser machine's enclosure and ground properly. IN - 0-5V Analog Signal Control Input, also can use 5V PWM Signal to Control 5V - 5V,Max output Current 50mA P3:
24V - Output 24V, Max Current 2A. G - Ground: The foot must connected with laser machine's enclosure and ground properly. 5V - Output 24V,Max Current 1A. L - Switch Laser Control: High Level(≥3V)- Laser Off, Low Level(≤0.3V)-Laser On. |